Table of Contents
Advertisement
Post QuickRestore Additional Setup
Upon completion of the setup of the server, tasks must be performed to return
the TaskSmart N2400 appliance to the previous state (before the QuickRestore
process) unless a factory state is desired. These tasks can include:
Reset the system date, time, and time zone.
Reinstall third-party backup software.
Add the TaskSmart N2400 appliance into the domain that it was
originally a part of.
Re-establish user accounts, if the TaskSmart is a part of a workgroup.
Re-establish user rights to drives, files, and directories, if the files were
retained.
NOTE: Being a part of a domain negates this requirement.
Restore data from tape to the external storage cabinets.
Restore data from tape to the operating system disk drives.
In general, the steps for a full recovery of a system from a failed state,
provided in Appendix A, "Backup Utility Management," may be required if
the QuickRestore CD is used.
Troubleshooting C-57
Advertisement
Chapters
Table of Contents
Troubleshooting
