Ethernet Network Connectors
Item
Description
NIC Ethernet port 4 (Eth 4)
NIC Ethernet port 3 (Eth 3)
NIC Ethernet port 2 (Eth 2)
NIC Ethernet port 1 (Eth 1)
Remote Insight Lights-Out Edition board Ethernet connector
Ethernet connector (Eth 0) on system board
Note: Connect a loopback cable to any of the server Ethernet ports (Eth 0
through Eth 4) that is not configured for use. Do not connect a loopback
cable to the Ethernet ports on the Remote Insight Lights-Out Edition board
or the storage enclosure.
Table 1-1
Initialization 1-9