Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 287

Running the Utilities from Diskette
Run the utilities from their individual diskettes. If you have a utility
diskette newer than the version on the SmartStart and Support
Software CD, use that diskette.
Create a diskette version of the utility from the SmartStart and Support
Software CD.
To create diskette versions of the utilities from the CD:
1. Start the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select Create Support
Software Disks, and then Next.
3. Select the diskette that you would like to create from the list, and then
follow the instructions on the screen.
Running the Utilities from the Compaq
SmartStart and Support Software CD
IMPORTANT: SmartStart is not used to configure the server. The server is preconfigured.
Use the QuickRestore CD for server configuration.
To run these utilities directly from the Compaq SmartStart and Support
Software CD:
1. Start the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select the utility that you
want to run, and then select Next.
Troubleshooting C-13