Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 197

5-14 Compaq TaskSmart N2400 Administration Guide
Tivoli NetView (AIX)
The TaskSmart N2400 appliance can be managed using Tivoli NetView
(AIX). Several steps are required to be able to manage the TaskSmart N2400
appliance through Tivoli NetView.
1. Install Compaq Insight Manager for Tivoli NetView Version 2.0
or later.
2. Modify CPQCONFIG.DAT in Tivoli NetView.
Compaq Insight Manager for Tivoli NetView
(AIX), Version 2.0
Compaq Insight Manager for Tivoli NetView integrates Compaq hardware
management and event notification into the Tivoli NetView network
management console. This release introduces an integrated browser launch
from the NetView console to the home page of the Web-enabled Compaq
Management Agents, which is used to collect in-depth information about
Compaq hardware. The information collected includes system status, system
health, prefailure monitors, performance and environmental data, event alarms,
and Windows 2000 statistics. Compaq Insight Manager for Tivoli NetView
can be obtained from the Compaq website:
http://www.compaq.com/products/servers
Depending on the version of Compaq Insight Manager for Tivoli NetView that
is being used, an addition to the CPQCONFIG.DAT may be needed to manage
the TaskSmart N2400 appliance from Tivoli NetView. Often the location of
the CPQCONFIG.DAT file varies. Do a search for the file. Once the file has
been located, add the following line to the file and save it:
Server : ntsrvr : 1.3.6.1.4.1.232.11.2.7.2.1.4.0 string "TaskSmart N2400";
This command string allows Tivoli NetView to identify the TaskSmart N2400
appliance.