Teaming Controls Dialog Box, Fault - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

6-44 Compaq TaskSmart N2400 Administration Guide
Fault Tolerance
The Fault Tolerance teaming option provides three redundancy control
options.
Figure 6-20. Teaming Controls dialog box, Fault Tolerant option
Manual—This setting lets the user change from a Primary NIC to a
Secondary NIC only when the user clicks Switch Now!
NOTE: The Switch Now! Option is disabled until the user selects Manual, and then clicks
Apply.
Fail on Fault—This setting automatically switches from a Primary NIC
to a Secondary NIC when the Primary NIC fails.