Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 294

C-20 Compaq TaskSmart N2400 Administration Guide
Viewing the Event List
1. From Compaq Insight Manager, select the appropriate server, and then
select View Device Data. The selected server is displayed, with buttons
around the perimeter.
2. Select Recovery, and then Integrated Management Log.
3. If a failed component has been replaced, select the event from the list.
Then select Mark Repaired.
NOTE: You can view the event list only from the Recovery/Integrated Management Log
screen as described in the previous steps.
Printing the Event List
1. From the Compaq Insight Manager screen, select the appropriate server.
2. Select Configuration, then Recovery, and then Print.
Compaq Survey Utility
The Compaq Survey Utility is a serviceability tool. It delivers
online-configuration capture and comparison to maximize server availability.
It is delivered on the Compaq Management CD in the SmartStart package, or
is available on the Compaq website. Refer to the Compaq Management CD for
information on installing and running the Compaq Survey Utility.
After running the Compaq Survey Utility, view the IML by loading the output
of the utility (typically called SURVEY.TXT) into a text viewer such as
Microsoft Notepad. The event list follows the system slot information. After
opening the text file, print it using the print feature of the viewer.
Compaq IML Management Utility
The Compaq IML Management Utility is a DOS-based tool that gives you the
offline ability to review, mark corrected, and print events from the IML. It is
located on the Compaq SmartStart and Support Software CD. Refer to the
SmartStart Installation for Servers poster, which ships with the server, for
information on how to install and use the IML Management Utility.