Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 174

4-24 Compaq TaskSmart N2400 Administration Guide
Primary Mapping
When an initial mapping is created for a user or group, it is marked as primary
by default. If you attempt to create multiple maps for one Unix user or group
to multiple Windows users or groups, then you will be asked to choose which
mapping to set primary.
1. Highlight the map that you want to assign as primary.
2. Click the Set Primary button. The dialog box illustrated in Figure 4-16
is displayed.
Figure 4-16. Set primary user mapping
3. Click Yes to have the new mapping selected as primary.
4. Click Apply at the top of the pane to save changes.
NOTE: An asterisk listed in the Mapped users or groups section denotes that the mapping
is primary.