Task 7: Complete The System Configuration; Required Configuration For All Work Environments - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Task 7: Complete the System
Configuration
After the initialization process, the next task is to complete the system
configuration. Several main configuration utilities specific to the
TaskSmart N2400 appliance need adjustment to meet your requirements.

Required Configuration for All Work Environments

Basic configuration of the system date, time, and time zone are required for all
work environments.
Changing the Date, Time, and Time Zone
1. Click Microsoft Management Console.
2. Expand the Core Operating System folder.
3. Double-click the Control Panel icon.
4. Double-click the Date/Time icon.
5. Click the Date/Time tab to view and change the current settings.
6. In the Date area, select the correct month, year, and day.
7. In the box below the date area, use the clock to select the hours,
minutes, seconds, or AM/PM indicator.
8. Adjust the selected value by clicking the up or down arrow. Typing
directly in the field is often faster than holding down the arrow.
9. Click the Time Zone tab to view and change the current settings.
10. In the list box above the map, select the appropriate time zone.
11. If you want your computer clock to automatically adjust when daylight
saving time changes, make sure a check mark is displayed in the
Automatically adjust clock for daylight saving changes box.
12. If changes are made, click Apply, and then click OK.
Initialization 1-13