Smart Array 5300 - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

6-10 Compaq TaskSmart N2400 Administration Guide
6. Under Controller Selection, click the drop-down box, and then select
Smart Array 5300 Controller.
7. The ACU presents either a physical or logical view of the arrays and
drives. The view is selectable using the option buttons at the bottom of
the interface. Select Logical, and then click Create Array.
Figure 6-4. Smart Array Controller Configuration Utility preview dialog box
IMPORTANT: Be sure to select the array controller after you start the ACU. Make sure
that the array controller displayed at the top of the window is NOT the Integrated Smart
Array Controller. Changes to the configuration of the controller can corrupt the operating
system on the server.
CAUTION: Existing logical drives must not be deleted prior to deleting the
virtual disks and pools associated with these logical drives. See "Deleting Virtual
Disks and Pools" later in this chapter.