Next, add the New Logical Drive to the Pool.
IMPORTANT: The user can add a maximum of eight logical drives to a pool.
1. From the TaskSmart N2400 console, click Microsoft Management
Console.
2. Click Disk System, and then click Snapshot Manager.
3. Select the desired pool.
4. Right-click Properties to show the Pool Properties dialog box.
5. Click the Storage Units tab, and then click Add. The Add New Storage
Units screen is displayed.
6. Select the storage unit you want to add, and then click Add.
7. Click OK to dismiss the pop-up that tells you that the storage units have
been added to the pool.
8. Click OK to dismiss the Pool Properties screen.
Advanced Administrative Procedures 6-23