Stopping And Starting Nfs File Service - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Stopping and Starting NFS File Service

There are two ways to start or stop NFS service on the TaskSmart N2400
appliance:
From the Microsoft Management Console (MMC)
From the command line
IMPORTANT: Before stopping the service, be sure to provide advance warning to users
so that they may save their work.
Use the following procedures to stop and restart the NFS file server.
Stopping and Starting NFS from the MMC
1. Log on to the TaskSmart server as Administrator.
2. Click Microsoft Management Console.
3. Click Services for UNIX.
4. Right-click Server for NFS.
5. To STOP: Highlight and click Stop. If Stop is not available, the service
is not currently running.
6. To START: Highlight and click Start. If Start is not available, it means
that the service is already running.
Stopping and Starting NFS from the Command
Line
1. Log in to the TaskSmart server as Administrator.
2. Click Manage with Command Line.
3. To STOP: From the command prompt, enter the following:
net stop "Server for NFS"
4. To START: From the command prompt, enter the following:
net start "Server for NFS"
Troubleshooting C-37