Deleting Virtual Disks And Pools - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Deleting Virtual Disks and Pools

When deleting virtual disks, it is important to remember the following:
Virtual disks must be deleted from the SWVR Snapshot Manager before
the underlying disk structure is deleted.
Do not delete the logical drives from the ACU before deleting the
virtual disks.
You must delete all the snapshots associated with a virtual disk before
you can delete the virtual disk.
If the virtual disk contains any data that you want to keep, back up the
data. Deleting a virtual disk destroys all the data stored on the disk.
Make sure that no one is accessing the virtual disk. You cannot it delete
if any files on the disk are open.
To delete a virtual disk:
1. From the TaskSmart N2400 console, click Microsoft Management
Console, click Disk System, and then click Snapshot Manager.
2. Expand the list showing pools, virtual disks, and snapshots.
3. Right-click any snapshots that are associated with the virtual disk to be
deleted, and then select Delete. Click OK. Repeat this step until there
are no snapshots associated with the virtual disk.
Figure 6-10. Snapshot Manager screen, deleting snapshots
Advanced Administrative Procedures 6-19