Remote Shell Daemon - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Server Settings
Use the Telnet Server settings page to change Telnet Server parameters. These
parameters determine how the TaskSmart N2400 Telnet Server operates. For
example, one parameter is the number of simultaneous Telnet Server
connections that the server allows.
Sessions
The sessions screen provides the ability to view or terminate active sessions.

Remote Shell Daemon

The remote shell, commonly referred to as "rsh" in UNIX, is a method for
allowing users to access a command prompt or to run a command on another
machine. It can be used in a fashion similar to Telnet Server or can be used to
directly invoke a remote command.
For example:
rsh <server name> ls -al
The remote shell runs the
results to your screen.
NOTE: A .RHOSTS file must be created to allow client access to the server. See the SFU
help topic "Rshsvc" on how to create the .RHOSTS file.
Currently, SFU implements only the remote command functionality of rsh. If
the users need a command line, they can use Telnet Server.
For more information regarding the setup and use of remote shell or the
remote shell service, refer to the online help documentation.
command on <server name> and returns the
ls -al
Remote Administration 5-3