Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 57

2-28 Compaq TaskSmart N2400 Administration Guide
5. The Create Snapshot Wizard launches. Click Next.
Figure 2-15. Create Snapshot Wizard screen
6. Configure each screen of the wizard with your data.
7. Select Finish when the last screen is complete.
8. To confirm the scheduled task:
a. Right-click Virtual Disk.
b. Select Properties.
c. Select the Scheduled Task tab. View the task listing for the task
name and scheduled date/time.
d. Click OK.
Recurring snapshot tasks can be configured so that a snapshot runs a
backup command and automatically deletes itself when the backup is
complete.
IMPORTANT: Veritas Backup Exec does not allow snapshots to run a backup command
and to automatically delete themselves when the backup completes.