Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 234

6-36 Compaq TaskSmart N2400 Administration Guide
Bypass Procedure:
To bypass the Configuration Wizard, follow these steps to expand your array:
1. Install the new physical drive or drives.
2. Run the ACU. The utility does not automatically start when new drives
are added.
3. Assign the new physical drives to an existing array. You can also create
a new array or arrays so that the existing array does not exceed 14
drives. Existing logical drives automatically expand across the physical
drives, including newly added ones.
4. Create a new logical drive to use the extra space on the expanded array.
See "Adding Additional Storage Units to the Pool" earlier in this chapter.