2-18 Compaq TaskSmart N2400 Administration Guide
4. Right-click the virtual disk, click New, and then click Snapshot. The
Snapshot Wizard opens and leads you through a series of questions.
Figure 2-9. New Snapshot Wizard screen
5. Click Next. The Snapshot Information screen is displayed.
6. Enter a name for the snapshot.
NOTE: Appropriate snapshot naming and volume naming must be used to identify each
snapshot individually.
7. Click Next. The Drive Letter Assignment screen is displayed.
8. Click Map Drive Letter and select a drive letter. Enter a volume label.
The default is the same volume label as the virtual disk. Optionally,
click No Drive Letter.
NOTE: It is not necessary to assign a drive letter to the snapshot until you need access to
the snapshot. However, if you plan to create one snapshot per virtual disk, it is advisable
to assign a drive letter at this time.
9. Click Next.
10. Click Finish.