Connector Pinouts For The Srx210 Services Gateway With Integrated Convergence Services Fxo And Fxs Ports - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

SRX210 Services Gateway Hardware Guide
Related
Documentation
RJ-11 Connector Pinouts for the SRX210 Services Gateway with Integrated Convergence
Services FXO and FXS Ports
Related
Documentation
158
Interface Cable and Wire Specifications for the SRX210 Services Gateway on page 155
RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port on page 156
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 10
The FXO and FXS ports use an RJ-11 cable.
Table 52 on page 158 describes the RJ-11 connector pinouts.
Table 52: RJ-11 Connector Pinouts
Pin
1
2
3
4
5
6
Interface Cable and Wire Specifications for the SRX210 Services Gateway on page 155
RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port on page 156
RJ-45 Connector Pinouts for the SRX210 Services Gateway Console Port on page 157
SRX210 Services Gateway with Integrated Convergence Services Front Panel and Back
Panel Views on page 12
Signal
No connect
No connect
RJ P –Ring
RJ N –Tip
No connect
No connect
Copyright © 2010, Juniper Networks, Inc.