Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual page 23

Services gateway
Hide thumbs Also See for SRX210 - HARDWARE GUIDE REV 3:
Table of Contents

Advertisement

Copyright © 2010, Juniper Networks, Inc.
Table 4: SRX210 Services Gateway Hardware Features (continued)
SRX210
Services
Gateway Low
Feature
Memory
SIP/analog voice
No
support
PoE support
No
Power supply
60 watts
adapter
AC input voltage
100 to 240 VAC
Gigabit Ethernet
2
ports
Fast Ethernet
6
ports
Console port
1
USB ports
2
Foreign Exchange
None
Station (FXS)
and Foreign
Exchange Office
(FXO) interface
Mini-PIM slots
1
LEDs
Status, Alarm,
HA, Power,
Mini-PIMs, 3G
ExpressCard,
Port (TX/RX and
PoE)
NAND flash
1 GB
Fans
1
NOTE: The PoE LED is enabled only on the PoE model of the SRX210 Services
Gateway. For non-PoE services gateways, the PoE LED remains off.
Chapter 1: Introduction to the SRX210 Services Gateway
SRX210
SRX210
Services
Services
Gateway High
Gateway Power
Memory
over Ethernet
No
No
No
Yes
60 watts
150 watts
100 to 240 VAC
100 to 240 VAC
2
2
6
6
1
1
2
2
None
None
1
1
Status, Alarm,
Status, Alarm,
HA, Power,
HA, Power,
Mini-PIMs, 3G
Mini-PIMs, 3G
ExpressCard,
ExpressCard,
Port (TX/RX
Port (TX/RX and
and PoE)
PoE)
1 GB
1 GB
1
1
SRX210
Services
Gateway with
Integrated
Convergence
Services
Yes
Yes
150 watts
100 to 240 VAC
2
6
1
2
Two FXS ports
and two FXO
ports
1
Status, Alarm,
HA, Power,
Mini-PIMs, 3G
ExpressCard,
Port (TX/RX and
PoE), and Voice
Interface
2 GB
2
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents