Services Gateway; Gateway - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

CHAPTER 9
Required Tools and Parts for Installing and
Maintaining the SRX210 Services Gateway
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
Copyright © 2010, Juniper Networks, Inc.
This chapter includes the following topic:
Required Tools and Parts for Installing and Maintaining the SRX210 Services
Gateway on page 59
Table 25 on page 59 lists the tools and equipments required to install and maintain the
SRX210 Services Gateway.
Table 25: Required Tools and Parts for Installing and Maintaining the
SRX210 Services Gateway
Task
Installing the SRX210 Services

Gateway

Connecting the SRX210

Services Gateway

Grounding the SRX210
Services Gateway
Packing the SRX210 Services
Gateway
Tools and Parts
Phillips (+) screwdriver,
number 1
Tie wrap
Electrostatic discharge (ESD)
grounding wrist strap
Phillips (+) screwdriver,
number 1
Blank panel to cover empty
Mini-PIM slot
Electrostatic bag or
antistatic mat, for each
component
Electrostatic discharge
(ESD) grounding wrist strap
Related Topic
Installing the SRX210
Services Gateway in a Rack
on page 71
Installing the SRX210
Services Gateway on a Desk
on page 74
Installing the SRX210
Services Gateway on a Wall
on page 76
"Connecting the SRX210
Services Gateway to the
Power Supply" on page 79
"Grounding the SRX210
Services Gateway" on page 82
"Packing the SRX210 Services
Gateway and Components for
Shipment" on page 163
59