Srx210 Services Gateway Leds; Front Panel Leds - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

SRX210 Services Gateway Hardware Guide

SRX210 Services Gateway LEDs

Front Panel LEDs

18
SRX210 Services Gateway with Integrated Convergence Services Front Panel and Back
Panel Views on page 12
SRX210 Services Gateway LEDs on page 18
SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 22
SRX210 Services Gateway Cooling System on page 23
SRX210 Services Gateway Power Supply on page 25
This topic includes the following sections:
Front Panel LEDs on page 18
Ethernet Port LEDs on page 20
Voice Interface Port LEDs on page 21
Figure 7 on page 18 shows the SRX210 Services Gateway front panel LEDs.
Table 11 on page 18 lists the LED indicators on the SRX210 Services Gateway front panel.
Figure 7: SRX210 Services Gateway Front Panel LEDs
Table 11: SRX210 Services Gateway Front Panel Components LEDs
Component Description
Alarm LED The Alarm LED has the following indicator colors:
Red and steadily on indicates a major alarm.
Amber and steadily on indicates a minor alarm.
Off indicates that the device is starting up.
NOTE: When the system is up and running, if the
Alarm LED is off, it indicates that no alarms are
present on the device.
Usage
The Alarm LED can be used
to gather information on
major or minor alarms or to
determine if the device is
functioning normally.
Copyright © 2010, Juniper Networks, Inc.