Installation Overview For The Srx210 Services Gateway - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

CHAPTER 8
Installation Overview for the SRX210
Services Gateway

Installation Overview for the SRX210 Services Gateway

Copyright © 2010, Juniper Networks, Inc.
This chapter includes the following topic:
Installation Overview for the SRX210 Services Gateway on page 57
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 24 on page 57.
Table 24: Installation Process Order for the SRX210 Services Gateway
Step Task
1 Review the safety guidelines
explained.
2 Verify that you have prepared your
site for the installation of the services
gateway using the checklist.
3 Unpack the services gateway and
verify that the parts are received.
4 Prepare the services gateway for
installation.
5 Install the services gateway.
For more information, see
"SRX210 Services Gateway General
Safety Guidelines and Warnings" on
page 127
"Site Preparation Checklist for the
SRX210 Services Gateway" on
page 49
"Unpacking the SRX210 Services
Gateway" on page 61
"Preparing the SRX210 Services
Gateway for Rack-Mount,
Desk-Mount, and Wall-Mount
Installation" on page 65
Installing the SRX210 Services
Gateway in a Rack on page 71
Installing the SRX210 Services
Gateway on a Desk on page 74
Installing the SRX210 Services
Gateway on a Wall on page 76
57