Gateway; Srx210 Services Gateway Software Configuration Overview; Preparing The Srx210 Services Gateway For Configuration - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

CHAPTER 16
Performing Initial Software Configuration
on the SRX210 Services Gateway

SRX210 Services Gateway Software Configuration Overview

Preparing the SRX210 Services Gateway for Configuration

Copyright © 2010, Juniper Networks, Inc.
This chapter includes the following topics:
SRX210 Services Gateway Software Configuration Overview on page 97
Performing Initial Software Configuration on the SRX210 Services Gateway Using the
CLI on page 100
Performing Initial Software Configuration on the SRX210 Services Gateway Using the
J-Web Interface on page 103
SRX210 Services Gateway Secure Web Access Overview on page 106
This topic includes the following sections:
Preparing the SRX210 Services Gateway for Configuration on page 97
Understanding Built-In Ethernet Ports on page 98
Mapping the Chassis Cluster Ports on page 98
Understanding Management Access on page 99
When the SRX210 services gateway powers on, it tries to boot the Junos OS from the
default storage media. If the device fails to boot from the default storage media, it tries
to boot from the alternate storage media.
Table 37 on page 97 provides information on the storage media available on the SRX210
services gateway.
Table 37: Storage Media on SRX210 Services Gateway
Storage Media
Internal NAND flash
USB storage device
Type
Default; always present
Alternate
97