Juniper Networks Technical Assistance Center - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

SRX210 Services Gateway Hardware Guide
Related
Documentation

Juniper Networks Technical Assistance Center

122
To prevent the Reset Config button from setting the device to the factory default
configuration and deleting all other configurations:
admin@host# set chassis config-button no-clear
You can still press and quickly release the button to reset it to the rescue configuration.
To prevent the Reset Config button from setting the device to the rescue configuration:
admin@host# set chassis config-button no-rescue
You can still press and hold the button for 15 seconds or more to reset the gateway to
the factory defaults.
To disable the button and prevent the device from resetting to either configuration:
admin@host# set chassis config-button no-clear no-rescue
The no-clear option prevents the Reset Config button from deleting all configurations
on the services gateway. The no-rescue option prevents the Reset Config button from
loading the rescue configuration.
To return the function of the Reset Config button to its default behavior, remove the
config-button statement from the device configuration.
Using the Reset Config Button on the SRX210 Services Gateway on page 121
Monitoring the SRX210 Services Gateway Chassis Using the CLI on page 113
Monitoring the SRX210 Services Gateway Components Using LEDs on page 115
Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on page 118
Monitoring the SRX210 Services Gateway Power System on page 119
Juniper Networks Technical Assistance Center on page 122
If you need assistance while troubleshooting a services gateway, open a support case
using the Case Manager link at
(within the United States) or 1-408-745-9500 (from outside the United States).
http://www.juniper.net/support/
Copyright © 2010, Juniper Networks, Inc.
, or call 1-888-314-JTAC