Preparing The Srx210 Services Gateway For Installation; Wall-Mount Installation; Preparing The Srx210 Services Gateway For Rack-Mount Installation - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

CHAPTER 11
Preparing the SRX210 Services Gateway
for Installation
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
Related
Documentation

Preparing the SRX210 Services Gateway for Rack-Mount Installation

Copyright © 2010, Juniper Networks, Inc.
This chapter includes the following topics:
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 65
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 65
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 67
Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 68
You can mount an SRX210 Services Gateway in a rack, on a desk, or on a wall. See the
following topics for more information:
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 65
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 67
Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 68
The mounting kits for rack, wall, and desk installation of the SRX210 Services Gateway
must be ordered separately. Contact your Juniper Networks customer service
representative for more information.
Site Preparation Checklist for the SRX210 Services Gateway on page 49
Unpacking the SRX210 Services Gateway on page 61
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services
Gateway on page 53
You can mount an SRX210 Services Gateway on four-post (telco) racks, enclosed
cabinets, and open-frame racks.
65