Physical Specifications - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

Physical Specifications

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Interface support — The ExpressCard interface supports the IP over PPP interface from
the network through the wireless link.
Dial-out support — The dialer interface can place calls and has multiple features such
as dial-backup, dialer-watchlist, and dialer-filter. The dialer interface can use the
ExpressCard to support this feature.
NOTE: The 3G ExpressCard does not support the dial-in feature.
Card information availability — You can use CLI commands to obtain information on
the ExpressCard, such as type, version, wireless status, and user profiles.
Security
GSM cards support PIN lock to prevent unauthorized access and use of the wireless
account.
You can use the CLI
request
You have the option to store the PIN code you provide in the services gateway
configuration , so that the SIM can be unlocked without user intervention on each
reboot or reset on the box.
NOTE: Currently all GSM cards support PIN-protected SIMs.
Table 15 on page 31 lists the physical parameters of the 3G ExpressCard.
Table 15: 3G ExpressCard Physical Specifications
Specification
Type
ExpressCard width
Thickness
Connector pins
Max power consumption
Voltage supply
SRX210 Services Gateway 3G ExpressCard Basic CLI Commands on page 33
Chapter 3: SRX210 Services Gateway 3G ExpressCard
commands to lock or unlock the SIM card.
Value
Standard ExpressCard with 34 modules
1.33 in. (34 mm)
0.19 in. (5 mm)
26
1.3 watts
3.3 V (primary source)
1.5 V (secondary source)
31