Unpacking The Srx210 Services Gateway; Verifying Parts Received With The Srx210 Services Gateway - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

CHAPTER 10

Unpacking the SRX210 Services Gateway

Unpacking the SRX210 Services Gateway
Related
Documentation

Verifying Parts Received with the SRX210 Services Gateway

Copyright © 2010, Juniper Networks, Inc.
This chapter includes the following topics:
Unpacking the SRX210 Services Gateway on page 61
Verifying Parts Received with the SRX210 Services Gateway on page 61
The SRX210 Services Gateway is shipped in a cardboard carton. The carton also contains
an accessory box and quick start instructions.
NOTE: The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
To unpack the SRX210 Services Gateway:
Open the box in which the device is shipped.
1.
Verify the parts received against the lists in "Verifying Parts Received with the SRX210
2.
Services Gateway" on page 61.
Store the shipping box and packing material in case you need to return or move the
3.
device at a later time.
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 59
Verifying Parts Received with the SRX210 Services Gateway on page 61
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 65
Installation Overview for the SRX210 Services Gateway on page 57
The SRX210 Services Gateway shipment package contains a packing list that includes
all parts and accessories available with the device. Check the parts in the shipment
61