Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual page 42

SRX210 Services Gateway Hardware Guide
Rear
Front
24
The cooling system works from side-to-rear in the services gateway chassis. The fans
draw air through vents along the left and right sides of the chassis and exhaust the air
through the rear side of the chassis.
The airflow produced by the fans keeps device components within the acceptable
temperature range.
Figure 10 on page 24 shows the airflow through the chassis for the SRX210 Services
Gateway with Low Memory, High Memory, and PoE models.
Figure 10: Airflow Through the Chassis (SRX210 Services Gateway with
Low Memory, High Memory, and PoE Models)
Figure 11 on page 25 shows the airflow through the chassis for the SRX210 Services
Gateway with Integrated Convergence Services model.
Air flow
Fan
Copyright © 2010, Juniper Networks, Inc.