Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual page 27

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
Table 5: SRX210 Services Gateway Specifications (continued)
Specification
Average power consumption
Altitude
Relative humidity
Temperature
Maximum thermal output
Noise level
CAUTION: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the services gateway.
SRX210 Services Gateway Description on page 3
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 10
Value
SRX210 Services Gateway Low Memory model: 27
watts
SRX210 Services Gateway High Memory model: 28
watts
SRX210 Services Gateway PoE model: 34 watts
(excluding PoE load)
SRX210 Services Gateway with Integrated
Convergence Services model: 43 watts (excluding
PoE load)
No performance degradation up to 10,000 ft (3048
m) for SRX210 Services Gateway Low Memory,
High Memory, and PoE models
No performance degradation up to 6561 ft (2000
m) for SRX210 Services Gateway with Integrated
Convergence Services)
5% to 90%, noncondensing
Normal operation ensured in temperature range of
32°F (0°C) to 104°F (+40°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
NOTE: These specifications are estimates and subject
to change.
SRX210 Services Gateway Low Memory: 120
BTU/hour
SRX210 Services Gateway High Memory: 126
BTU/hour
SRX210 Services Gateway with PoE: 164 BTU/hour
(Excluding PoE load)
SRX210 Services Gateway with Integrated
Convergence Services: 232 BTU/hour (Excluding
PoE load)
70 dB(A) or less per EN ISO 7779
9