About This Guide; Objectives; Audience; Documentation Conventions - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

About This Guide

Objectives

Audience

Documentation Conventions

Copyright © 2010, Juniper Networks, Inc.
This preface includes the following topics:
Objectives on page xiii
Audience on page xiii
Documentation Conventions on page xiii
SRX Series Documentation and Release Notes on page xv
Obtaining Documentation on page xv
Documentation Feedback on page xvi
Requesting Technical Support on page xvi
This guide describes hardware components and installation, basic configuration, and
basic troubleshooting procedures for the Juniper Networks SRX210 Services Gateway.
It explains how to prepare your site for services gateway installation, unpack and install
the hardware, power on the services gateway, perform initial software configuration, and
perform routine maintenance. After completing the installation and basic configuration
procedures covered in this guide, see the Junos OS configuration guides for information
about further Junos OS configuration.
This guide is designed for network administrators who are installing and maintaining a
Juniper Networks SRX210 Services Gateway or preparing a site for device installation.
To use this guide, you need a broad understanding of networks in general and the Internet
in particular, networking principles, and network configuration. Any detailed discussion
of these concepts is beyond the scope of this guide.
Table 1 on page xiv defines the notice icons used in this guide.
xiii