Srx210 Services Gateway Chassis Serial Number And Agency Labels; Label - Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual

SRX210 Services Gateway Chassis Serial Number and Agency Labels

SRX210 Services Gateway Mini-Physical Interface Module Serial Number Label
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Appendix D: Contacting Customer Support and Returning the SRX210 Services Gateway Hardware
Power Supply 0
NOTE: In the
show chassis hardware
Module (Mini-PIM) slot number is reported as an FPC number, and the
Mini-PIM number (always 0) is reported as the PIC number.
Most components also have a serial number ID label attached to the
component body.
The SRX210 Services Gateway has a serial number ID and agency labels on the bottom
of the chassis as shown in Figure 32 on page 161.
Figure 32: Location of SRX210 Serial Number and Agency Labels
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the SRX210 Services
Gateway. Each Mini-PIM has a unique serial number. The serial number label is located
on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would
be installed on the device). The exact location might be slightly different on different
Mini-PIMs, depending on the placement of components on the Mini-PIM.
Packing the SRX210 Services Gateway and Components for Shipment on page 163
Return Procedure for the SRX210 Services Gateway on page 159
Contacting Customer Support on page 162
command, the Mini-Physical Interface
161