Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual page 37

Copyright © 2010, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
Table 11: SRX210 Services Gateway Front Panel Components
LEDs (continued)
Component Description
Status LED The Status LED has the following indicator colors:
Green and steadily on indicates that the device
is functioning normally.
Amber and steadily on indicates that the device
is starting up.
Red and steadily on indicates that the device
has failed.
Mini-PIM LED The Mini-PIM LED has the following indicator
colors:
Green and steadily on indicates that the Mini-PIM
is functioning normally.
Off indicates that the Mini-PIM is not present or
not detected by the device.
Power LED The Power LED has the following indicator colors:
Green and steadily on indicates that the device
is functioning normally.
Amber and steadily on indicates that the Power
button has been pressed and quickly released.
Off indicates that the device is not receiving
power.
HA LED The HA LED has the following indicator colors:
Green and steadily on indicates that all HA links
are available.
Red and steadily on indicates that the HA links
are not working as expected.
Amber and steadily on indicates that some HA
links are not working as expected.
Off indicates that HA is not enabled.
Usage
The Status LED can be
used to determine whether
the device is starting up, is
functioning normally, or has
failed.
The Mini-PIM LED can be
used to determine if the
Mini-PIM is present and
detected by the device.
The Power LED can be used
to determine if the device is
receiving power.
The HA LED can be used to
determine if high
availability is enabled on
the device.
19