Juniper SRX210 - HARDWARE GUIDE REV 3 Hardware Manual page 123

Copyright © 2010, Juniper Networks, Inc.
Chapter 16: Performing Initial Software Configuration on the SRX210 Services Gateway
Table 39: Required Setup Fields
Setup Wizard Page
Introduction
Configure System: Identification
Configure J-Web Preferences
Table 40: Optional Setup Fields
Field
Configure System:
Identification
Field
Hostname
Domain Name
Root Password (required)
Verify Root Password
(required)
J-Web starting page options
J-Web commit options
Function
Default Gateway
DNS Name Servers
Domain Search
Your Action
Read the introduction page for
basic instructions on using the
setup wizard. Click Start to
continue.
Type the name of the services
gateway.
Type the name of the network
or subnetwork to which the
services gateway belongs
Type the password that the
user root will use to log in to the
device.
Retype the root password.
Specify the tab you want to
appear when J-Web starts.
Specify when you want J-Web
to commit your configuration
changes.
Your Action
Type the IP address of the
default gateway.
Type the IP address of each
server that maintains
databases for resolving
hostnames and IP addresses,
and click Add.
Type the IP address or domain
name of each domain that
includes the services gateway
to include it in a DNS search.
105