Configuring Edirectory And Oes Services - Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual

Page Name
Online Update
Installation Settings
Managing CAs and Certificates
Edit Default Settings
Managing CAs and Certificates
Installation Settings
2 Continue with

1.5 Configuring eDirectory and OES Services

For the exercises in this guide, you need specific eDirectory, NTP, and SLP configurations.
1 Use the following table to navigate and complete the eDirectory pages:
20 OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Action
Depending on the patches that are in the Update channels, you
might need to run the update process more than once.
1. Select Run Update, then click Next.
Although you might need to scroll down to see them, the
correct patches are automatically selected. Do not change
the selections.
2. Click Accept.
The update patches are downloaded and installed.
3. When both status bars indicate 100%, click Next > OK.
The system refreshes or restarts, depending on the
patches in the channel.
4. If the patch dialog box reappears with additional patches
selected, click Accept and repeat Step 3.
If the Installation Settings page appears, continue with the
next row.
1. If there is no red text under the CA Management link, click
Next > Next and skip to
eDirectory and OES Services," on page
If the system restarted, there is red text under CA
Management. This is because the installation no longer
has the
2. Click CA Management.
1. Click Edit Default Settings.
1. Type the
Password fields, then click Next.
There is no need to fill in the other fields because the
default CA will be replaced with a secure eDirectory
Organizational CA later in the installation process.
1. Click Next.
1. Click Next.
Configuring eDirectory and OES
Section 1.5, "Configuring
root password in memory.
root password in the Password and Confirm
Services.
20.
TM