Cisco CRS-1 - Carrier Routing System Router Administration Manual page 91

Chapter 3 Provisioning Telephony and Media
Configure the Default TTS Provider for the CRS System
Step 1
Step 2
Step 3
Optionally, you can configure a default TTS Provider by doing the following:
The Cisco CRS Prompt Manager uses the default TTS Provider for rendering TTS
prompts if a TTS Provider is not configured in the TTS Prompt. This usually
happens in the case of VXML applications.
Select System > System Parameters.
In the Default TTS Provider drop down list, choose the provider you wish to be
the system default.
If you are deploying an VXML applications and the only TTS
Note
functionality you need is to play pre-recorded .wav files, select the Cisco
LiteSSMLProcessor option as the Default TTS Provider. This option
allows you to execute SSML that has .wav file references in them.
Click Update.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Provisioning ASR and TTS in Cisco CRS
3-33