Provisioning Mrcp Tts Servers - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Provisioning ASR and TTS in Cisco CRS
Step 3
Step 4

Provisioning MRCP TTS Servers

Step 1
Step 2
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
3-30
Use this web page to specify the following:
Field Name
Provider Name
Click Add to apply changes.
Your changes appear in the MRCP TTS Providers list web page. You are now
ready to provision MRCP TTS Servers.
Use the MRCP TTS Servers Configuration web page to specify information about
a TTS server, including.
Procedure
From the CRS Administration menu bar, choose Subsystems > MRCP TTS.
The MRCP TTS Providers List web page opens.
Click the MRCP TTS Servers hyperlink.
The MRCP TTS Servers Configuration summary web page opens.
Chapter 3
Description
Drop-down list., to choose the MRCP TTS Provider
supported by Cisco CRS.
To change the Provider Name, click Edit and modify
the name of the provider. When you edit a Provider
Name, the new name is added to the drop-down list.
The information in the Provider Name list is
Note
stored in the property file that is
synchronized across the cluster. Changes are
reflected when you use the
CreateTTSPrompt step in the CRS Editor;
the new Provider will be available for use by
the CRS Editor.
Provisioning Telephony and Media