Cisco CRS-1 - Carrier Routing System Router Administration Manual page 217

Chapter 7 Managing Prompts, Grammars, Documents, and Custom Files
The application attributes fall into the following groups:
Attribute
Application-Version
Application-Name
Application-Type
Application-Description
(optional)
Application-Id
Max-Sessions
Enabled
Script
Default-Script
Initial-Script
Name
version-number
application-attribute
newline
digit
General main attributes: See the following table.
•
Description
The application configurations file version. The value is a legitimate
version number.
The unique name of the application (see CRS Application Management).
The type of the application (Cisco Script Application, Busy,
Ring-No-Answer, Unified ICME Translation Routing, or Unified ICME
Post Routing).
The description for the application (see CRS Application Management).
A unique identifier for the application (see CRS Application Management).
The maximum number of sessions for the application (see CRS Application
Management).
The application is enabled if the value is set to true (see CRS Application
Management). If the value is set to false, the case is ignored.
The main script of a Cisco Script Application (see CRS Application
Management). The value must be relative to the Scripts directory. CRS 4.x
doesn't support configuring script parameters.
The default script of a Cisco Script Application, Unified ICME Translation
Routing or Unified ICME Post Routing application (see CRS Application
Management). The value must be relative to the Scripts directory. CRS 4.x
doesn't support configuring script parameters.
The initial script of an Unified ICME Post Routing application (see CRS
Application Management). The value must be relative to the Scripts
directory. CRS 4.x doesn't support configuring script parameters.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Value
digit+{.digit+}*
(any legitimate application attribute) newline
CR LF | LF | CR (not followed by LF)
{0-9}
Managing AAR Files
7-29