Migrating To A Different Ldap Directory - Cisco CRS-1 - Carrier Routing System Router Administration Manual
Customer response solutions release 4.1(1)
Hide thumbs
Also See for CRS-1 - Carrier Routing System Router:
- Getting started manual (289 pages) ,
- Troubleshooting manual (264 pages) ,
- Migration manual (250 pages)
Table of Contents
Advertisement
Chapter 8
Managing the Cisco CRS System
Migrating to a Different LDAP Directory
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Use the following steps to migrate from one LDAP directory to another.
Procedure
From the CRS Administration menu bar, choose Tools > User Management.
The User Management web page appears.
Verify that the minimum required users (CRS administrator, JTAPI provider,
RmCm user—see
Requirements to Migrate LDAP Information, page
specified with the correct passwords in the LDAP directory to which you want to
migrate.
Access the Cisco CRS Control Center (System > Control Center) and ensure that
all the nodes in the cluster are operating and the CRS Node Manager service is
running.
Note
If any node is down during this verification check, run the Serviceability
Utility to synchronize the ccndir.ini across the cluster. (For instructions,
see the
"CRS Serviceability Utility" section on page
this utility, restart CRS Node Manager on all nodes in the cluster.
Run the plug-in for the required directory in the Unified CM Administration web
page.
This website describes the Unified CM migration process for DCD,
From the CRS Administration menu bar, choose System > LDAP Information.
The CRS LDAP server information web page opens.
Select the LDAP Server Type for the required directory, and this action
automatically populates the sample entries for other fields on this page.
Update the LDAP server host name, IP address, or AD domain fields with the
new LDAP directory information in the CRS LDAP Server Information web page.
See
Adding LDAP Server Information, page 8-21
appropriate and click Update.
The following prompt appears:
or IP address. Please select one of the following options.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Managing CRS LDAP Server Information
to modify each field as
There is a change in LDAP server host name
8-27) are
8-44.) After running
AD, and ND.
8-29
Advertisement
Table of Contents
