Cisco CRS-1 - Carrier Routing System Router Administration Manual page 159

Chapter 6 Configuring Cisco Applications
Field
ID
Maximum Number Of
Sessions
Enable
Script
Default Script
Step 5
Description
Accept the automatically-generated ID, or enter a unique ID.
The Historical Reporting feature uses this ID to identify this
Note
application.
The maximum amount of simultaneous sessions (instances) that the
application can handle.
The limit for the maximum number of simultaneous remote
Note
monitoring sessions is 16, but the actual number depends on your
system's CPU and memory resources. Entering a number that is too
high can result in unacceptable system performance.
(Radio button) Accept Yes (the default).
Perform one of the following actions:
Choose a script from the drop-down list to run the application. If the
•
script contains parameters, the parameters display below the Script
drop-down menu. Each parameter has a check box, which enables you
to override the default value for that parameter. If you want to override
the value, check the check box for that parameter.
Note All scripts under the \default directory are listed in the drop-down
list of the Script field in the Cisco Script Application Configuration
page.
Click Edit, enter the script name in the dialog box, and click OK. The
•
User Prompt dialog box closes, and the name you entered appears in
the Script field.
Note If you enter the script name as a file URL, enter the value with
double backslashes (\\). For example, file://c:\\temp\\aa.aef
The default script executes when an error occurs with the configured script
application that causes it to abort.
Perform one of the following actions:
• Choose a script from the drop-down list to run the application. If a
Default Script is not defined, the internal system default is executed.
• Click Edit, specify a script in the dialog box that appears, and click
OK.
Click Add.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
About CRS Applications
6-5