Cisco CRS-1 - Carrier Routing System Router Administration Manual page 243
Customer response solutions release 4.1(1)
Hide thumbs
Also See for CRS-1 - Carrier Routing System Router:
- Getting started manual (289 pages) ,
- Troubleshooting manual (264 pages) ,
- Migration manual (250 pages)
Table of Contents
Advertisement
Chapter 8
Managing the Cisco CRS System
Field
LDAP administrator
password
User Base location
Unified CM Base
location
Step 2
Step 3
Description
LDAP administrator '
Defaults (DC Directory, Microsoft Active Directory, Netscape Directory):
ciscocisco
Distinguishing Name of the LDAP container in which Unified CM user
information is stored. Required for the cluster setup procedure only. Enter this
information in the format shown as the default value for your LDAP type.
Replace the text in italics with your values, if necessary. In these formats, ou is
an Organizational Unit, o is an Organization, cn is a Common Name, and dc is
a Domain Component.
Defaults:
•
DC Directory: ou=Cisco,o=cisco.com
Microsoft Active Directory: ou=Cisco,dc=AD_domain
•
For example, if AD_domain is myad.cisco.com, the default value would be
ou=Cisco,dc=myad,dc=Cisco,dc=com. (This default value assumes that
your users are under the Users OU. If your users are under another OU,
adjust this value as needed.)
•
Netscape Directory: ou=Users,o=cisco.com.
Distinguished Name of the LDAP container in which Unified CM information
is stored. Required for the cluster setup procedure only. Enter this information
in the format shown as the default value for your LDAP type. Replace the text
in italics with your values, if necessary. In these formats, ou is an Organizational
Unit, o is an Organization, and dc is a Domain Component.
Defaults:
DC Directory: o=cisco.com
•
•
Microsoft Active Directory: ou=Cisco,dc=AD_domain
For example, if AD_domain is myad.cisco.com, the default value would be
ou=Cisco,dc=myad,dc=Cisco,dc=com. (This default value assumes that
your users are under the Users OU. If your users are under another OU,
adjust this value as needed.)
Netscape Directory: o=cisco.com.
•
Specify an LDAP server Type (DCD, AD, or ND).
Specify an LDAP Server host name, IP address, or AD domain.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Managing CRS LDAP Server Information
8-23
Advertisement
Table of Contents
