Cisco CRS-1 - Carrier Routing System Router Administration Manual page 89

Chapter 3 Provisioning Telephony and Media
Note
Step 3 Click the Add MRCP TTS Server hyperlink.
The MRCP TTS Server Configuration web page opens.
Step 4 Use this web page to specify the following:
Field Name
Server Name
Port
Provider
Locales
Click Add to apply changes.
Step 5
Your changes appear in the MRCP TTS Server List web page. You are now ready
to provision MRCP TTS Default Genders.
For a complete description of all columns, icons, and buttons on this page,
see Chapter 15, "The Subsystems Menu."
Description
Host name or IP address of the server the MRCP
TTS server software is installed on.
TCP port number used to connect to the MRCP
Server. The valid options are:
•
•
Note
Drop-down list, choose the name of the MRCP TTS
provider associated with this server.
Languages supported by the TTS Provider. Select a
language from the drop-down list and click Add
Language; the selected language appears in the
Enabled Language list.
Use the check box to specify the playback "gender"
for the language: Male, Female, or Neutral. Select as
many genders as you have installed and enabled on
the specified MRCP TTS Server.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Provisioning ASR and TTS in Cisco CRS
ScanSoft Server - 4900
Nuance Server - 554
The range is between 30000 and 32323.
3-31