Cisco CRS-1 - Carrier Routing System Router Administration Manual page 218

Managing AAR Files
The subsystems Subdirectory Attributes
Attribute
Application-Version The subsystems configuration file version. The value is a legitimate version
Subsystem-Class
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
7-30
Chapter 7
• Attributes defined for application versioning and sealing information: These
attributes define features of the application to which the AAR file belongs.
These are the same set as the main attributes defined in the table listed under
the Attributes defined for extension and directory versioning and sealing
information. .
The following table describes the syntax of the manifest file for the subsystems
subdirectory.
Name
subsystem-file
version-info
version-number
subsystem-attribute
newline
digit
The subsystems attributes fall into the following groups:
• General main attributes: See the following table.
Description
number.
The classname of the subsystem to be installed. The class must be accessible by
the CRS classloader from the Subsystem-Class-Path provided in the manifest
file.
Attributes defined for application versioning and sealing information: These
•
attributes define features of the application to which the AAR file belongs.
These are the same set as the main attributes defined in the table listed under
the Attributes defined for extension and directory versioning and sealing
information. .
Managing Prompts, Grammars, Documents, and Custom Files
Value
version-info newline *subsystem-attribute
Subsystem-Version: version-number
digit+{.digit+}*
(any legitimate application attribute) newline
CR LF | LF | CR (not followed by LF)
{0-9}