Mrcp Tts Server Configuration; Add A New Mrcp Tts Server - Cisco CRS-1 - Carrier Routing System Router Administration Manual

The MRCP TTS Menu Option

MRCP TTS Server Configuration

Note

Add a New MRCP TTS Server

Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
15-24
The Provider Name drop-down list displays the MRCP TTS providers supported
by the Cisco CRS administration.
You need at least one MRCP TTS Server associated with each configured
provider.
Use the MRCP TTS Server Configuration web pages to display, add, modify, and
delete the text-to-speech server's name, port location, and available language.
You must have a MRCP TTS Provider defined before you can provision a MRCP
TTS Server.
On any MRCP TTS Configuration web page, click the MRCP TTS Server
hyperlink on the navigation bar to access the MRCP TTS Servers Configuration
summary web page.
To modify an existing MRCP TTS Server, click any hyperlink within the server's
summary table entry; the MRCP TTS Server Configuration web page opens.
To add a new MRCP TTS Server, click the Add MRCP TTS Server hyperlink.
(For more information, see the section that follows.)
To access the MRCP TTS Server Configuration page, click the Add MRCP TTS
Server hyperlink.
Use the MRCP TTS Default Genders Configuration web page to display or
modify the gender setting for each Locale.
On any MRCP TTS Configuration web page, click the MRCP TTS Default
Genders hyperlink on the navigation bar to access the MRCP TTS Default
Genders Configuration summary web page.
The Locale radio button has the Male, Female, or Neutral options.
Chapter 15 The Subsystems Menu