Loading Paper In Tray 2 And The Optional Paper Feed Unit - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

Loading Paper in Tray 2 and
the Optional Paper Feed Unit
Paper of different sizes can be loaded
in Tray 2 (standard) and the 500- and
1000-sheet paper feed units (optional)
by adjusting the positions of the side
and end guides.
This section describes loading paper
in Tray 2 (standard).
Note
❒ If the side and end guides are in
the right positions for the paper to
be loaded, they do not have to be
adjusted.
A A A A
Slowly slide the paper tray out,
until it stops.
B B B B
Adjust the side guide according
to the size and orientation of the
paper as follows:
A Release the side guide lock.
B Press the side guide green le-
ver (A A A A ), adjust the position of
the guide by moving it in the
direction of the arrow (B B B B ).
C C C C
Adjust the end guide according to
the size and orientation of the pa-
per by gripping both edges of the
guide (A A A A ), and then moving it in
the direction of the arrow (B B B B ).
ZDJH005J
D D D D
Align all four sides of the paper
stack, and then load it in the tray.
Important
ZDJY003J
❒ Check that the top of the stack is
not higher than the limit mark
inside the tray.
Loading Paper
3
ZDJY802J
ZHXH760J
ZDJY901J
51