Loading Paper; Loading Paper In Tray 1 And The Optional Paper Feed Unit - Ricoh C410DN - Aficio SP Color Laser Printer Hardware Manual

Loading Paper

This describes how to load paper into the paper tray and bypass tray.
R CAUTION:
• Do not pull out the paper tray forcefully. If you do, the tray might fall and
cause an injury.

Loading Paper in Tray 1 and the optional paper feed unit

The following example explains loading procedure for the standard paper tray
(Tray 1). The same procedure can be used for the optional paper feed unit.
Important
❒ Make sure paper is not stacked above the limit mark inside the tray. Misfeeds
might occur.
❒ Do not put different types of paper in a single paper tray.
A
Slowly slide out the paper tray (Tray 1), until it stops. Then, lift the front of
the tray slightly, and then pull the tray completely out.
Place the tray on a flat surface.
B
Pinch the green clips on the side guide and the end guide, and then adjust
the guides to the paper size being loaded.
AET041S
AET042S
Loading Paper
5
89