Adjusting Tray Registration - Ricoh Aficio AP610N Quick Installation Manual

Adjusting the Printer

Adjusting Tray Registration

You can adjust the registration of
each tray. The vertical adjustment is
used for all trays. Normally, you need
not update the registration. But when
the optional paper feed unit or the
duplex unit is installed, updating is
useful in some cases.
The following procedure describes
how to adjust tray 2. The same proce-
dure applies to other trays as well.
A
Press the {Menu} key.
4
The [Menu] screen appears on the
display.
B
Press the {U} or {T} key to dis-
play [Maintenance], and then press
the {# Enter} key .
Menu:
Maintenance
The maintenance menu appears.
C
Press the {U} or {T} key to dis-
play [Registration], and then press
the {# Enter} key .
The registration menu appears.
52
D
Print the test sheet to preview the
settings. Confirm that [Prt. Test
Sheet] is displayed, and then press
the {# Enter} key.
A screen prompting you to select
the tray to be adjusted appears.
E
Press the {U} or {T} key to select
the tray to adjust, and then press
the {# Enter} key.
Prt. Test Sheet:
Tray 2
The test sheet prints out. The dis-
play returns to the registration
menu. Press the {Escape} key.
F
Confirm the position of the image
on the test sheet, and then adjust
the registration value.
AGN200S
G
Press the {U} or {T} key to dis-
play [Adjustment], and then press
the {# Enter} key.
Adjustment:
Horiz: Tray 2
ZKGX480E