Setting Originals In The Document Feeder (Adf) - Ricoh 3245e Operating Instructions Manual

Basic Operation
Setting Originals in the Document Feeder
(ADF)
You can set several pages of originals in the document feeder (ADF) at a time.
Only originals that consist of separate sheets of paper can be set in the document
feeder (ADF); these originals will be called "sheet originals". It is possible to
copy not only one side but both sides of originals that are set in the document
feeder (ADF).
Note
The document feeder (ADF) is optional. Preparation is required to use it.
Non-recommended originals for the document feeder
4
For more information about recommended and non-recommended originals
for the document feeder (ADF), see the "Copy Reference".
Important
When using the scanner unit, you cannot set the following types of origi-
nals in addition to those you cannot use for the copy function in the docu-
ment feeder (ADF).
• Originals smaller than A5
• Originals longer than the long-edge of Double Letter
Setting non-recommended originals in the document feeder (ADF) might
cause paper misfeeds or damage to the originals. Set these originals on the
exposure glass (platen glass).
Setting Originals in the Document Feeder
• Do not stack originals above the limit mark.
• When copying thin originals (41–52 g/m
exposure glass (platen glass) to avoid damage due to a multi-sheet feed (if
several sheets are fed together at the same time).
• When irregular size originals that are longer than A4 or Letter are loaded,
a paper misfeed may occur in the document feeder (ADF).
• For more information about the automatically detected original size, see
the "Copy Reference".
Note
The automatically detected original size differs depending on Metric/
Inch version.
32
2
11–14 lb), set the originals on the