Ricoh 3245e Operating Instructions Manual page 467

Chapter7 Page 215 Thursday, January 27, 2000 1:57 PM
Deleting a Specific Sender (Forwarding)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Key Operator Settings
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the function number for
"Forwarding" with the number
keys.
Note
If "Forwarding" is not shown,
press [ Prev.] or [ Next].
F
Enter the "Delete Sender" code
with the number keys.
G
Choose the Specified Sender you
want to delete by entering its code
with the number keys.
Note
If you make a mistake, press the
{Clear/Stop} key and enter a cor-
rect number.
If you have a mistake with the
second digit, press [No] and en-
ter the number again.
H
Press [Yes].
7
215