Installing/Uninstalling Type 270 Twain Driver Ver.2; Using Windows 95/98 - Ricoh 3245e Operating Instructions Manual

Installing/Uninstalling Type 270 TWAIN
Driver Ver.2
To use this scanner unit, Type 270
TWAIN Driver Ver.2 must be in-
stalled. Installation differs depending
on Windows 95/98, Windows NT 4.0
or Windows NT 3.51. Install the driv-
er in accordance with the OS you are
using.
When you reinstall Type 270 TWAIN
Driver Ver.2, or when it becomes un-
necessary, uninstall the driver in ac-
cordance with the OS you are using.
Important
Before starting this installation,
close all documents and applica-
tions. In a network environment,
confirm that users who are logged
on are disconnected. Be sure to do
this when it will create the least in-
terference with other users.
After installing the driver, you
must restart the computer.
If Type 450 TWAIN Driver (other
products) is installed, uninstall it
first, and then install Type 270
TWAIN Driver Ver.2.

Using Windows 95/98

Preparation
Before installation, confirm that
the computer you are using is con-
figured to use the TCP/IP proto-
col, by selecting [Configuration] in
[Network] from [Control Panel].
Installing
When using Windows 95/98, follow
these steps.

Installing/Uninstalling Type 270 TWAIN Driver Ver.2

A
Close all the applications that are
currently running.
B
Insert the CD-ROM into the CD-
ROM drive.
A setup program starts automati-
cally and the [welcome] dialog box
appears.
Reference
If the setup program does not
start automatically, see P.24
"Starting the Setup Program".
C
Read the message on the screen
carefully, and then click [Next].
[Software License Agreement] ap-
pears.
D
Read the message on the screen
carefully. If you agree, click [Yes].
[Select Program Folder] appears.
E
Read the message on the screen
carefully. If you agree, click
[Next].
U s u a l ly , y ou d o n o t n eed t o
change the program folder.
Installation starts, and [Setup Com-
plete] appears when it is complet-
ed.
Note
During installation, if the dialog
box appears asking you to con-
firm that you want to rewrite
the pre-installed files, click
[Yes].
F
Confirm the message on the
screen, and then click [Finish].
Select [Yes, I want to restart my com-
puter now.].
3
23