Ricoh 3245e Operating Instructions Manual page 465

Chapter7 Page 213 Thursday, January 27, 2000 1:57 PM
and the display shown in step E
appears again.
J
Press [PrevMenu] 3 times.
K
Press the { { { { User Tools/Counter} } } } key.
Registering Specific Senders
(Forwarding)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
Key Operator Settings
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "Forwarding" code with
the number keys.
Delete Receiver.
Note
If "Forwarding" is not shown,
press [ Prev.] or [ Next].
F
Enter the "Register Sender" code
with the number keys.
G
Choose a Specific Sender to regis-
ter by entering its code number.
Note
If you make a mistake, press the
{Clear/Stop} key and enter a cor-
rect number.
7
213