Setting A Single Original On The Exposure Glass - Ricoh 3245e Operating Instructions Manual

Chapter1 Page 20 Thursday, January 27, 2000 1:53 PM
Getting Started
- How to set A4, B4, A3, 8 - - -
1
11", 8 / " 14" and 11" 17" size
2
originals
1
Original
Exposure glass
- How to set A5, 5 -
- -
B5 size originals
Original
Exposure glass
Limitation
1 1
5 / " 8 / "/A5 size on the expo-
2 2
sure glass is not detected. Set 5
1
8 / "/A5 size documents in the
2
ADF.
20
Setting a Single Original on
1
/ "
2
the Exposure Glass
Set originals that cannot be placed in
the Document Feeder (ADF), such as
Where original is set
Document Feeder(ADF)
a book, on the exposure glass one
page at a time.
A
ND0X01E2
1 1
/ " 8 / " and
2 2
Where original is set
Document Feeder(ADF)
ND0X01E1
1
/ "
2
B
Lift the Document Feeder (ADF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
1. Reference mark
2. Scale
Note
If you do not raise the Docu-
ment Feeder (ADF) by at least
30 degrees, the original size will
not be detected.
Close the Document
(ADF).
Note
When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from ris-
ing.
Feeder